Last updated: 05-11-2009
|
|
Land Cruiser BJ/FJ 40 / 42 series
This system will increase the vehicle height to +50 to +70 mm or +70 to
+100 mm depending on which kit is selected. All springs in the +50 mm kits have the original
spring lengths, however, the increased height of + 70 to 100 mm required an
adjustment of the spring length to enable the wheel to sit correctly into the
wheel arch. The springs are slightly longer. Because it is now possible to fit larger tyres the axle bump stop
needs to be adapted accordingly in order to prevent the wheels from running
against the body. Special spacer blocs are available.The special
HST greasable anti-inversion shackles will prevent the spring from reversing when in full articulation.
The PolyUrethane spring and chassis bushes provide a noise-less long-lasting solution for the problems related to rubber bushes.
Special shock absorbers with adapted damping settings make the system stable and
reliable in any circumstance, on- or off road.
|
|
|
Land Cruiser BJ/FJ 43 / 45 / 47 series
This system will increase the vehicle height
by +50 mm. The system is designed to take the same weight as original but
with extra capacity built in just to make sure it will still work when
overloaded*.
The special HST greasable anti-inversion shackles
will prevent the spring from reversing when in full articulation. The
PolyUrethane spring and chassis bushes provide a noise-less long-lasting
solution for the problems related to rubber bushes. Special shock
absorbers with adapted damping settings make the system stable and
reliable in any circumstance, on- or off road.
|
All kits include
Shock absorber kits
* All prices are excluding VAT. Shipping is extra
** For early 40 series we have special bushes, please state the production year of your vehicle when ordering
Left: BJ40 with the HST 715.40.01 system / Right: HJ45 with the HST 715.40.03
system.
*)Please note that the factory stated max. gross weight may not be exceeded at any time.
© 1997 - 2009 Heystee Automotive b.v.
|